Material Safety Data Sheets

Display # 5101520253050100All # Web Link Hits 1      Sonneborn NP-2 NP 2™ is a three-component, highly flexible, nonpriming, high-performance polyurethane sealant. 209 2      Tremco Dymeric 240 http://www.northbaywaterproofing.com/administrator/index.php?option=com_weblinks 157 3      Tremco Dymeric 240 FC Dymeric 240FC is a three component, chemically curing, epoxidized polyurethane sealants specially formulated for dynamically moving building joints. 181 4      Tremco Dymonic Dymonic is a high performance, low modulus, one-component, moisture curing, modified polyurethane joint sealant. 166 5      Para Primer An adhesive primer formulated to prepare construction surfaces prior to application of Parastick ‘n’ Dry, Superstop and various tapes. Construction surfaces other than HDPE (High Density Polyethylene) liner are always primed with Paraprimer prior to taping. Paraprimer helps create a bonding to any sound, clean surface and to provide a flexible base to enhance adhesion. 144 6      Paragranular Paragranular is designed to work in conjunction with Paraseal products to form a waterproof transitional seal. It is used to form a cove at all horizontal to vertical transitions, at floor/wall transitions and penetrations through horizontal surfaces, and to fill voids around irregularities. 173 7      Paramastic An expandable mastic and caulk for use with Paraseal waterproofing membrane. To protect against water leakage in the areas of: penetration, honey-combs, unfilled ties or spalled concrete. Paramastic is an important part of the Paraseal waterproofing system - substitutions are not allowed. 172 8      Parastick 'n' Dry A laminate of bentonite applied to mesh with a pressure sensitive adhesive on one side. Parastick ‘n’ Dry is used in conjunction with waterstops Parastop II, waterproofing membranes, Paraseal and Paramastic to assist in waterproofing difficult areas. It is used in blindside waterproofing applications to detail soldier piles and to wrap concrete imbeds such as pipe penetrations. Parastick ‘n’ Dry can also be used to form water isolations such as in sandwich-slab applications. 154 9      Paraseal Paraseal is a dual sheet waterproofing membrane manufactured to controlled thicknesses of 150 mils to 200 mils of tough, high density polyethylene (HDPE) and expandable, quality granular bentonite. 215 10      Paraseal LG Paraseal LG is a multi-layer sheet membrane waterproofing system. It consists of a self-sealing, expandable layer of granular bentonite laminated at the rate of up to one pound per square foot to an impermeable, high density polyethylene (HDPE). The third component is a protective layer of spun polypropylene. Together, these three components form a tough, high performance waterproofing membrane manufactured in controlled thicknesses of 170 mils to 200 mils, specially designed for blindside installations such as lagging, under floor and elevator pits. Paraseal LG also withstands applications where shot-creates is blown directly into the face of the membrane. 152 11      Superstop A multiple composite waterstop which combines the strength and toughness of conventional water-stop with the self-sealing ability of bentonite. 158 12      Tremproof 250 GC Aliphatic, rapid curing, high solids, VOC compliant, modified polyurethane waterproofing membrane that can be applied to "Green" Concrete. 162